Below are the ignition coils currently available from AA Ignition. We are constantly adding more ignition coils to our catalog so check back for new products.
Camshaft Position Sensor Set of 2 - Fits 3.5L, 4.0L V6 Nissan & Infiniti - Replaces 23731-AL61A, 237316J90B
- REPLACEMENT BANK 1 & 2 CAMSHAFT POSITION SENSORS SET OF 2 – The camshaft position sensors determines the rotating position of the camshaft to regulate spark timing and fuel injector operation in sync with the crankshaft sensors. This set replaces the bank 1 passenger side and bank 2 driver side camshaft sensors of your vehicle.
- FITS THE FOLLOWING VEHICLES – 2003 – 2008 Infiniti FX35 | 2003 – 2007 Infiniti G35 | 2002 – 2004 Infiniti I35 | 2006 – 2008 Infiniti M35 | 2004 – 2010 Infiniti QX56 | 2003 – 2007 Nissan 350Z 3.5L | 2002 – 2006 Nissan Altima 3.5L | 2005 – 2012 Nissan Frontier 4.0L | 2002 – 2008 Nissan Maxima | 2003 – 2007 Nissan Murano | 2012 Nissan NV1500, NV2500, NV3500 | 2005 – 2012 Nissan Pathfinder 4.0: | 2005 – 2009 Nissan Quest 3.5L | 2005 – 2012 Nissan Xterra 4.0L |.
- REPLACES PART# Bank 1 Sensor : 907-716, 237316J90B, 23731-6J906, 23731-6J905, 237316J900, 237315M016, 237315M015, 237315M010 | Bank 2 Sensor : 917-704, 23731-AL61A, 23731AL616, 23731AL615, 23731AL610, 237317Y001, 237317Y000. The sensor that has an angled connector is the bank 2 sensor. These sensors can easily be located behind the engine near the firewall. Bank 1 is on the passenger side and Bank 2 ( Angled Sensor ) is located on the driver side of the engine depending on the vehicle model
- OEM FIT, QUALITY, FINISH – While this is not a genuine Nissan, Infiniti or Dorman part, it is a direct replacement for the factory camshaft position sensors. If you are experiencing rough idle, hard to start, stalling, hesitation, decrease in engine performance and a check engine light with codes P0340 & P0345, then you may have to replace your camshaft position sensors.
- LIFETIME WARRANTY – This replacement camshaft position sensor kit of 2 comes complete with a lifetime warranty. If the part ever fails on your Nissan or Infiniti vehicle including year models 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12 simply contact us for a replacement. Save time and money off of dealer prices by purchasing this part from AA Ignition.
Fits The Following Vehicles:
|
|
|
|
|---|---|---|
|
|
|
|
|
|
|
|---|---|---|
Bank 1 SensorReplaces:
|
Bank 2 SensorReplaces:
|
This set replaces the bank 1 passenger side and bank 2 driver side camshaft sensors of your vehicle. The sensor that has an angled connector is the bank 2 sensor. These sensors can easily be located behind the engine near the firewall. Bank 1 is on the passenger side and Bank 2 ( Angled Sensor ) is located on the driver side of the engine depending on the model of your vehicle. |
Replace Your Camshaft Position Sensors and Eliminate These Common Issues:
|
|
|
|
|---|---|---|
CEL (Check Engine Light) with Codes P0340 & P0345 |
Running Issues like Decrease in Engine Performance, Stalling and Hesitation |
Rough Idle and Hard Starting |
Experience the AA Ignition Difference!
|
|
|
|
|---|---|---|
ASE Certified TechniciansInstalling parts on you vehicle can be difficult and we understand. That’s why we have certified technicians on staff to assist you with installation or even properly diagnosing your car. Our technicians will even provide the factory repair manual to make installation easier for you. |
Strict Quality ControlAll of our sensors undergo strict quality control not just before shipping but throughout the production process. During each step of production multiple quality control checks are performed to insure each and every part lasts for years to come. |
An American Small BusinessAA Ignition is a division of GWA Auto Parts and we are proud to be an American Small Business. Located in sunny South Florida and founded by long time car enthusiasts, AA Ignition takes pride in providing quality products at an exceptional value. |
Camshaft Position Sensor Set of 2 - Fits 3.5L, 4.0L V6 Nissan & Infiniti - Replaces 23731-AL61A, 237316J90B
- REPLACEMENT BANK 1 & 2 CAMSHAFT POSITION SENSORS SET OF 2 – The camshaft position sensors determines the rotating position of the camshaft to regulate spark timing and fuel injector operation in sync with the crankshaft sensors. This set replaces the bank 1 passenger side and bank 2 driver side camshaft sensors of your vehicle.
- FITS THE FOLLOWING VEHICLES – 2003 – 2008 Infiniti FX35 | 2003 – 2007 Infiniti G35 | 2002 – 2004 Infiniti I35 | 2006 – 2008 Infiniti M35 | 2004 – 2010 Infiniti QX56 | 2003 – 2007 Nissan 350Z 3.5L | 2002 – 2006 Nissan Altima 3.5L | 2005 – 2012 Nissan Frontier 4.0L | 2002 – 2008 Nissan Maxima | 2003 – 2007 Nissan Murano | 2012 Nissan NV1500, NV2500, NV3500 | 2005 – 2012 Nissan Pathfinder 4.0: | 2005 – 2009 Nissan Quest 3.5L | 2005 – 2012 Nissan Xterra 4.0L |.
- REPLACES PART# Bank 1 Sensor : 907-716, 237316J90B, 23731-6J906, 23731-6J905, 237316J900, 237315M016, 237315M015, 237315M010 | Bank 2 Sensor : 917-704, 23731-AL61A, 23731AL616, 23731AL615, 23731AL610, 237317Y001, 237317Y000. The sensor that has an angled connector is the bank 2 sensor. These sensors can easily be located behind the engine near the firewall. Bank 1 is on the passenger side and Bank 2 ( Angled Sensor ) is located on the driver side of the engine depending on the vehicle model
- OEM FIT, QUALITY, FINISH – While this is not a genuine Nissan, Infiniti or Dorman part, it is a direct replacement for the factory camshaft position sensors. If you are experiencing rough idle, hard to start, stalling, hesitation, decrease in engine performance and a check engine light with codes P0340 & P0345, then you may have to replace your camshaft position sensors.
- LIFETIME WARRANTY – This replacement camshaft position sensor kit of 2 comes complete with a lifetime warranty. If the part ever fails on your Nissan or Infiniti vehicle including year models 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12 simply contact us for a replacement. Save time and money off of dealer prices by purchasing this part from AA Ignition.
Fits The Following Vehicles:
|
|
|
|
|---|---|---|
|
|
|
|
|
|
|
|---|---|---|
Bank 1 SensorReplaces:
|
Bank 2 SensorReplaces:
|
This set replaces the bank 1 passenger side and bank 2 driver side camshaft sensors of your vehicle. The sensor that has an angled connector is the bank 2 sensor. These sensors can easily be located behind the engine near the firewall. Bank 1 is on the passenger side and Bank 2 ( Angled Sensor ) is located on the driver side of the engine depending on the model of your vehicle. |
Replace Your Camshaft Position Sensors and Eliminate These Common Issues:
|
|
|
|
|---|---|---|
CEL (Check Engine Light) with Codes P0340 & P0345 |
Running Issues like Decrease in Engine Performance, Stalling and Hesitation |
Rough Idle and Hard Starting |
Experience the AA Ignition Difference!
|
|
|
|
|---|---|---|
ASE Certified TechniciansInstalling parts on you vehicle can be difficult and we understand. That’s why we have certified technicians on staff to assist you with installation or even properly diagnosing your car. Our technicians will even provide the factory repair manual to make installation easier for you. |
Strict Quality ControlAll of our sensors undergo strict quality control not just before shipping but throughout the production process. During each step of production multiple quality control checks are performed to insure each and every part lasts for years to come. |
An American Small BusinessAA Ignition is a division of GWA Auto Parts and we are proud to be an American Small Business. Located in sunny South Florida and founded by long time car enthusiasts, AA Ignition takes pride in providing quality products at an exceptional value. |